You’ve looked high and low for that one piece. Well, look no further. The Smith machine has answered the challenge. Start with a counterbalanced Olympic Bar that puts the starting weight at five pounds. Marvel at linear bearings that keep things running effortlessly. Employ the safety pegs that are a flip of the wrist away. Utilize the Olympic plate storage in the rear that makes this a complete workout center. Train on !

Features Warranty: Legend Fitness Systems warrants to the original purchaser that Legend/Contours Express equipment will be free from defects in material and workmanship under normal use and service for the following periods and in the following respects: LIFETIME WARRANTY - Welds and Frames FIVE-YEAR WARRANTY - Bronze Bushings, Sealed Rotating Bearings and Pulley Wheels ONE-YEAR WARRANTY - Cables, Weight Plates, Guide Rods, and all other components not mentioned elsewhere in this warranty. NINETY-DAY WARRANTY - Upholstery and Grips All warranty periods begin to run from the date of delivery to the original purchaser. The obligation of Legend under this warranty is limited to repairing or replacing warranted defective parts, as Legend may elect, at the Legend plant in Powell, Tennessee, without charge to purchaser for either parts or labor. Purchaser is responsible for all transportation and insurance costs on returned or replaced equipment to and from the Legend plant in Powell, Tennessee. This limited warranty does not cover and no warranty is given with respect to: 1. Component parts not manufactured by Legend. 2. Products that are altered without the express, written consent of Legend. 3. Products purchased other than directly from Legend or through a Legend authorized dealer.

Specifications Frame Materials: All steel components are machined to a minimum of +/- .030" Construction is primarily of Square Tubing 3" x 11g, Rectangular Tubing 4" x 2" x 11g and Rectangular Tubing 3" x 2" x 11g and a combination of other heavy structural tubular steel sizes with an ASTM rating of A500 grade (minimum mechanical properties of 58,000 PSI tensile strength and 46,000 PSI yield strength) Construction: Features all-welded construction by inert-gas MIG welding to conform with and in accordance with the following codes and/or standards: 3:1 AWS, A3.0 Welding Terms and Definitions 3.2 AWS D1.1-81 Structural Welding Code-Steel 3.2 AWS D9.1 Specifications Frame Finish: Each piece of equipment is prepared both mechanically and chemically for powder-coating. This process includes a high-temperature, high-pressure iron phosphate wash to ensure optimum adhesion of the electrostatically applied TGIC polyester powder. This is an engineered powder that is scuff resistant and long wearing. The coating is then baked at 400 degrees Far. and carefully monitored to ensure complete curing. Technical summaries are determined using 3.0 - 5.0 mil powder film over iron-phosphated, pretreated steel using and conforming with the following test methods: ASTM B5965-96, C ASTM D 3451-93, 13 UL DTOV2 organic coatings Padding and Upholstery: The padding material is 2" thick rebond foam meeting ASTM 1692 and MVSS302 standards for flammability. Foam density is 8 lbs. per cubic foot. Upholstery is 32 oz. Sulfide-stain resistant "Naugahyde" formulated to meet small scale flammability test requirements contained in Federal Standard 191A (CCC-A-680 a). All pads are top double-stitched. Foam is glued to a 3/4" thick support board, then trimmed to fit exactly. Corners are radiused and edges are chamfered on both top and bottom to promote comfort and durability. Bearings: Input and movement arms rotate with either non-friction roller bearings with a Basic Radial Load Rating of 2420 pounds, contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment. Weight Transport: 1/4" diameter aircraft cable with a 7 x 19 construction and black nylon coating. the cable is rated at a breaking strength of 4200 lbs. Pulleys: Pulleys are 4 1/2" diameter fiberglass-impregnated nylon with a precision fit cable groove and 6203 double sealed non-friction roller bearings. Spring Suspension: Heavy duty die cast springs are used under the weight stack to reduce shock and vibration stresses. Guide Rods: Guide rods are solid steel and hard chrome plated to ensure quiet operation and low friction movement. Laniard Pins: All Legend selectorized equipment features weight stack pins that are laniard with a coiled self-storing cord to prevent pin removal or loss. Handgrips: 45 durometer rubber handgrips are used for comfort, safety and durability.

Dimensions/Weights Length 55 in 137.5 cm Width 65 in 162.5 cm Height 92 in 230 cm Floorspace 80.78 ft2 7.51 m2 Stack Weight N/A N/A Max Weight N/A N/A Max User Weight UNK lb UNK kg Unit Weight UNK lb UNK kg Shipping Weight 750 lb 340.9 kg